[linux-misc] USB-ADSL Modem

[Ämin Baumeler]

Guten Tag allerseits

Seit einigen Tagen versuche ich erfolglos mein USB-ADSL Modem (ZyXEL Prestige 630-41)
auf Linux(Debian/Kernel: Linux 2.6.12) zu konfigurieren.
Da ZyXEL keine Treiber für UNIX Systeme hat, musste ich den eciadsl Treiber installieren.
Wenn ich nun die Verbindung aufbauen will (Provider: Sunrise), sehe ich folgenden Output:

---------------------------------------------------------------------------------------------------------------------------------
[EciAdsl 1/5] Setting up USB support...

Preliminary USB device filesystem is OK

[EciAdsl 2/5] Uploading firmware...

eciadsl-firmware: success
firmware loaded successfully

[EciAdsl 3/5] Synchronization...


 Please Wait.. Synchronisation in progress [-]
...
OK eciadsl-synch: success                                                           
Synchronization successful

[EciAdsl 4/5] Connecting to provider...

Using:
 vpi.vci=8.35
 vendor/product=0x0915/0x8000
 verbose level=1
 log file=/tmp/eciadsl-pppoeci.log (enabled)
 pusb_set_interface_alt=4
using channel 1
Using interface ppp0
Connect: ppp0 <--> /dev/pts/0
sent [LCP ConfReq id=0x1 <magic 0xd63e80d5>]
sent [LCP ConfReq id=0x1 <magic 0xd63e80d5>]
rcvd [LCP ConfAck id=0x1 <magic 0xd63e80d5>]
rcvd [LCP ConfReq id=0x4a <auth chap MD5> <magic 0x72ba5a3f>]
sent [LCP ConfAck id=0x4a <auth chap MD5> <magic 0x72ba5a3f>]
rcvd [CHAP Challenge id=0x46 <2358f76a96655bcbad2b10e71c05bd7f>, name = "ipc-bei640-r-br-01"]
sent [CHAP Response id=0x46 <eb9b2c05e9130bafac9b79f809c49bda>, name = "xxxxxxx at adslplus.ch"]
rcvd [LCP ConfReq id=0x0 <mru 1492> <auth chap MD5> <magic 0x749ce396>]
sent [LCP ConfReq id=0x2 <magic 0x22ae54d9>]
sent [LCP ConfAck id=0x0 <mru 1492> <auth chap MD5> <magic 0x749ce396>]
sent [LCP ConfReq id=0x2 <magic 0x22ae54d9>]
rcvd [LCP ConfReq id=0x1 <mru 1492> <auth chap MD5> <magic 0x749ce396>]
sent [LCP ConfAck id=0x1 <mru 1492> <auth chap MD5> <magic 0x749ce396>]
sent [LCP ConfReq id=0x2 <magic 0x22ae54d9>]
rcvd [LCP ConfReq id=0x2 <mru 1492> <auth chap MD5> <magic 0x749ce396>]
sent [LCP ConfAck id=0x2 <mru 1492> <auth chap MD5> <magic 0x749ce396>]
sent [LCP ConfReq id=0x2 <magic 0x22ae54d9>]
rcvd [LCP ConfReq id=0x3 <mru 1492> <auth chap MD5> <magic 0x749ce396>]
sent [LCP ConfAck id=0x3 <mru 1492> <auth chap MD5> <magic 0x749ce396>]
sent [LCP ConfReq id=0x2 <magic 0x22ae54d9>]
rcvd [LCP ConfReq id=0x4 <mru 1492> <auth chap MD5> <magic 0x749ce396>]
sent [LCP ConfAck id=0x4 <mru 1492> <auth chap MD5> <magic 0x749ce396>]
sent [LCP ConfReq id=0x2 <magic 0x22ae54d9>]
rcvd [LCP ConfReq id=0x5 <mru 1492> <auth chap MD5> <magic 0x749ce396>]
sent [LCP ConfAck id=0x5 <mru 1492> <auth chap MD5> <magic 0x749ce396>]
sent [LCP ConfReq id=0x2 <magic 0x22ae54d9>]
rcvd [LCP ConfReq id=0x6 <mru 1492> <auth chap MD5> <magic 0x749ce396>]
sent [LCP ConfAck id=0x6 <mru 1492> <auth chap MD5> <magic 0x749ce396>]
sent [LCP ConfReq id=0x2 <magic 0x22ae54d9>]
rcvd [LCP ConfReq id=0x7 <mru 1492> <auth chap MD5> <magic 0x749ce396>]
sent [LCP ConfAck id=0x7 <mru 1492> <auth chap MD5> <magic 0x749ce396>]
sent [LCP ConfReq id=0x2 <magic 0x22ae54d9>]
rcvd [LCP ConfReq id=0x8 <mru 1492> <auth chap MD5> <magic 0x749ce396>]
sent [LCP ConfAck id=0x8 <mru 1492> <auth chap MD5> <magic 0x749ce396>]
sent [LCP ConfReq id=0x2 <magic 0x22ae54d9>]
rcvd [LCP ConfReq id=0x9 <mru 1492> <auth chap MD5> <magic 0x749ce396>]
sent [LCP ConfAck id=0x9 <mru 1492> <auth chap MD5> <magic 0x749ce396>]
LCP: timeout sending Config-Requests
Connection terminated.
Modem hangup
Script /usr/bin/eciadsl-pppoeci -v 1 -vpi 8 -vci 35 -vendor 0x0915 -product 0x8000 -mode LLC_RFC2364 finished (pid 3947), status = 0x0
---------------------------------------------------------------------------------------------------------------------------------

Der Provider scheint mich gar nie nach dem Passwort zu fragen, und Sunrise antwortet auch nicht 
mit einem ConfAck auf das zweite ConfReq, was zu einem timeout führt.

Hier nun noch die /tmp/eciadsl-pppoeci.log Datei:
---------------------------------------------------------------------------------------------------------------------------------
################################################################################

< pid=3947 > [Thu Feb  2 20:03:38 2006 494238] log started (binary compiled on Sep 24 2005 10:37:46)
< pid=3947 > [Thu Feb  2 20:04:14 2006 248407] error reading from PPP
reason: Input/output error
< pid=3947 > [Thu Feb  2 20:04:14 2006 248485] reading from PPP=-1
< pid=3947 > [Thu Feb  2 20:04:14 2006 248501] end of handle_ep_data_out tcount=0
---------------------------------------------------------------------------------------------------------------------------------

Wenn ich nun Linux beende und Windows boote, muss ich zuerst immer das Modem ausstecken und wieder neu einstecken,
sonst erhalte ich auch in diesem OS ein timeout.

Ich hoffe irgendwer kann mir weiterhelfen.
Vielen Dank
ämin-------------- nächster Teil --------------
Ein Dateianhang mit HTML-Daten wurde geschreddert...
URL: http://www.lugbe.ch/vpipermail/linux-misc/attachments/20060202/2a74bd60/attachment.htm