[linux-support] Konsolen 2 bis 6 funktionieren nicht

[Aravindo]

Hallo Leute

Ich habe Suse Linux 9.1.
Normalerweise kann man ja mit ALT-F1 bis F6 zwischen Konsolen 
umschalten; geht bei mir aber nicht.
Die Konsolen 2 bis 6 sind alle schwarz, funktionieren also nicht.
(X auf K7 Funktioniert)

Klingt nach einem /etc/inittab Problem, ich bin aber der Meinung, dass 
diese ok sein dürfte. (siehe Anhang)

Ich habe das Gefühl, dass inittab gar nicht gelesen wird, da auch ein 
anderer Diense nicht läuft (faxgetty).

Seht Ihr irgendwelche merkwürdigen Dinge in der Konfiguration, oder 
suche im am falschen Ort?

Vielen Dank & Gruss,

Aravindo
-------------- nächster Teil --------------
#
# /etc/inittab
#
# Copyright (c) 1996-2002 SuSE Linux AG, Nuernberg, Germany.  All rights reserved.
#
# Author: Florian La Roche, 1996
# Please send feedback to http://www.suse.de/feedback
#
# This is the main configuration file of /sbin/init, which
# is executed by the kernel on startup. It describes what
# scripts are used for the different run-levels.
#
# All scripts for runlevel changes are in /etc/init.d/.
#
# This file may be modified by SuSEconfig unless CHECK_INITTAB
# in /etc/sysconfig/suseconfig is set to "no"
#

# The default runlevel is defined here
id:5:initdefault:

# First script to be executed, if not booting in emergency (-b) mode
si::bootwait:/etc/init.d/boot

# /etc/init.d/rc takes care of runlevel handling
#
# runlevel 0  is  System halt   (Do not use this for initdefault!)
# runlevel 1  is  Single user mode
# runlevel 2  is  Local multiuser without remote network (e.g. NFS)
# runlevel 3  is  Full multiuser with network
# runlevel 4  is  Not used
# runlevel 5  is  Full multiuser with network and xdm
# runlevel 6  is  System reboot (Do not use this for initdefault!)
#
l0:0:wait:/etc/init.d/rc 0
l1:1:wait:/etc/init.d/rc 1
l2:2:wait:/etc/init.d/rc 2
l3:3:wait:/etc/init.d/rc 3
#l4:4:wait:/etc/init.d/rc 4
l5:5:wait:/etc/init.d/rc 5
l6:6:wait:/etc/init.d/rc 6

# what to do in single-user mode
ls:S:wait:/etc/init.d/rc S
~~:S:respawn:/sbin/sulogin

# what to do when CTRL-ALT-DEL is pressed
ca::ctrlaltdel:/sbin/shutdown -r -t 4 now

# special keyboard request (Alt-UpArrow)
# look into the kbd-0.90 docs for this
kb::kbrequest:/bin/echo "Keyboard Request -- edit /etc/inittab to let this work."

# what to do when power fails/returns
pf::powerwait:/etc/init.d/powerfail start
pn::powerfailnow:/etc/init.d/powerfail now
#pn::powerfail:/etc/init.d/powerfail now
po::powerokwait:/etc/init.d/powerfail stop

# for ARGO UPS
sh:12345:powerfail:/sbin/shutdown -h now THE POWER IS FAILING

# getty-programs for the normal runlevels
# <id>:<runlevels>:<action>:<process>
# The "id" field  MUST be the same as the last
# characters of the device (after "tty").
1:2345:respawn:/sbin/mingetty --noclear tty1
2:2345:respawn:/sbin/mingetty tty2
3:2345:respawn:/sbin/mingetty tty3
4:2345:respawn:/sbin/mingetty tty4
5:2345:respawn:/sbin/mingetty tty5
6:2345:respawn:/sbin/mingetty tty6
#
#S0:12345:respawn:/sbin/agetty -L 9600 ttyS0 vt102

#
#  Note: Do not use tty7 in runlevel 3, this virtual line
#  is occupied by the programm xdm.
#

#  This is for the package xdmsc, after installing and
#  and configuration you should remove the comment character
#  from the following line:
#7:3:respawn:+/etc/init.d/rx tty7


# modem getty.
# mo:235:respawn:/usr/sbin/mgetty -s 38400 modem

# fax getty (hylafax)
m0:2345:respawn:/usr/lib/fax/faxgetty /dev/ttyS0

# vbox (voice box) getty
# I6:35:respawn:/usr/sbin/vboxgetty -d /dev/ttyI6
# I7:35:respawn:/usr/sbin/vboxgetty -d /dev/ttyI7

# end of /etc/inittab