[linux-support] Wireless Access Point anschliessen [half-solved]

[Theo Schmidt]

On 05.11.21 17:26, Markus Wernig wrote:
> Wenn das stimmt, was du schreibst (absolut identische Netzkonfiguration, 
> egal an welchem AP), ist der DLink als Repeater konfiguriert und leitet 
> alle Pakete transparent an die Fritzbox weiter.
> Steht dazu was im Handbuch, wie man da wieder rauskommt?

Danke Markus! Zunächst steht:
The DWL-2000AP+ can operate as an Access Point; in Access 
Point-to-Access Point Bridging mode; Access Point-to-Multipoint Bridging 
mode; or Wireless Client mode."

1 Access Point mode is the default setting. This mode is used to create 
a wireless LAN.

2 Wireless Client mode will transform any IEEE 802.3 Ethernet device 
(e.g., a computer, printer, etc.) into an 802.11b wireless client, if 
you are connecting to another DWL-2000AP+ when it is acting as an Access 
Point.

3 Wireless Bridge mode will allow you to connect two LANs together. The 
wireless bridge will only work with another DWL-2000AP+.

4 Multi-Point Bridge mode will allow you to connect multiple wireless 
LANs together. Other wireless LANs must be using DWL-2000AP+s.

...
Troubleshooting

1.The computer used to configure the DWL-2000AP+ cannot access the 
Configuration menu.

Check that the Ethernet Adapter is working properly. Please see item 3 
(Check that the drivers for the network adapters are installed properly) 
in this Troubleshooting section to check that the drivers are loaded 
properly.

(Das scheinen Treiber für die Netzwerkkarte eines PCs zu sein.)

Check that the IP Address is in the same range and subnet as the 
DWL-2000AP+. Please see Checking the IP Address in Windows XP in the 
Networking Basics section of this manual. Note: The IP Address of the 
DWL-2000AP+ is 192.168.0.50. All the computers on the network must have 
a unique IP Address in the same range, e.g., 192.168.0.x. Any computers 
that have identical IP Addresses will not be visible on the network. 
They must all have the same subnet mask, e.g., 255.255.255.0

(Das ist ja das Problem, ich habe hier ein  192.168.1.x Netz. Chrigu hat 
mir ein Workaround gepostet, aber es änderte nichts. Das Handbuch sagt, 
funktioniere auch mit Linux, gibt aber keine Angaben dazu.)

Technical Specifications
Standards
IEEE 802.11g n IEEE 802.11 n IEEE 802.11b n IEEE 802.3 n IEEE 802.3u
Device Management
Web-Based- Internet Explorer v6 or later; Netscape Navigator v6 or 
later; or other Java-enabled browsers
DHCP Server and Client

(Komisch was das Java soll, aber schon Ping funktioniert ja nicht.)

LG, Theo